VEHICLES WITH LOWERED FLOORS

FUNCTIONAL, COMFORTABLE AND PRACTICAL TO USE

The result of important collaborations with leading European manufacturers in the special vehicles sector and with major car manufacturers, the low floor versions are produced in Italy and approved by the manufacturers of the vehicles to which they are applied. All Handytech productions have CE certification and meet all quality standards.


The housings for wheelchairs are integrated with the vehicle, guaranteeing the necessary steps to place those transported in wheelchairs. The original suspension systems are not modified in any way, and access to the lowered part of the vehicle is via a servo-assisted, aluminium ramp with a non-slip covering. Customisable accessories that can be adapted to a wide range of vehicles, tastes and needs. Layouts with 4/5/6 seats, plus a wheelchair space.

PEUGEOT PARTNER TEPEE HANDY STYLE EURO 6

TECHNICAL SPECIFICATIONS

  • Length: 1320 mm
  • Width: 770 mm
  • Internal vehicle height: 1460 mm

 

FLEXIBLE CONFIGURATION

At the rear, the vehicle is equipped with three separate folding and removable seats that allow you to configure them for the transport of a manual or electronic wheelchair. The low-floor covered in non-slip material soundproofing guarantees a maximum spacing of 1320 mm in length,
770 mm in width for a 1430 mm and 1460 mm internal input height ..

 

RETAINING SYSTEM

The wheelchair and passenger retaining system consists of two automatic (mechanical or electrical) retractor reels and two rear Automatic mechanical retractor reels, as well as a safety belt with three fastening points and a retractor reel. The 20 G sealing system complies with ISO 10542 and national directives.

 

AESTHETIC IMPACT

The central part of the rear bumper of the vehicle is fixed to the boot door and, while the vehicle is in use, does not change its aesthetic appearance and allows the maintainence of the parking sensors in the original position, ensuring their functional efficiency.

 

FOLDING RAMP

The access ramp attached to the low floor, only 1230 mm long and 730 mm wide, is equipped with a folding part that allows you to leave the rearward vision completely clear to the driver. The ergonomic handles, the servo-assisted system and the non-slip upholstery make its use fast, functional and safe. The small size of the ramp also allows the use of the original overhead compartment, ensuring safe luggage transport.

 

TAXI RAMP

The taxi ramp is foldable at two points and can be folded down horizontally on the floor of the vehicle. The ingenious system allows, with a simple operation, the ramp to be pulled down for easy loading and unloading of luggage. The capacity remains unchanged at 300 kg.

 

FOLDING AND REMOVABLE SEATS

The individual rear seats can be completely and easily disassembled to allow the transportation of five passengers as before or four passengers plus a wheelchair or three passengers plus a bulky wheelchair for up to two passengers plus a very bulky wheelchair or electric scooter. All the rear seats are equipped with their original seat belt.

 

TECHNICAL SPECIFICATIONS

The low floor upholstered with soundproof and anti-slip material ensures a maximum space of 1400 mm in length (1250 mm in the Maxi version), 790 mm in width with an input and internal height of 1420 mm with a loading capacity of 300 kg. Servo-assisted access ramp with folding closure - Four independent wheelchair fastening points fitted with manual and automatic retractor reels - A safety belt for the passenger in a wheelchair, with automatic retractor reel -

FLEXIBLE C ONFIGURATION

The vehicle is equipped with two seats in the second row that become three in the Maxi version thanks to a two-seater bench and a single folding and removable seat. Both solutions allow one to configure the vehicle for the transport of a manual or electronic wheelchair.
The low floor covered with anti-slip soundproofing material ensures a maximum space of 1400 mm in length (1250 mm in the Maxi version), 790 mm in width and an inner input height of 1420 mm with a load capacity of 300 kg. The layout can
be enriched with various options, such as the LED lighting to facilitate operations during night time use, the folding ramp to optimise the loading of baggage and the electric winch to further facilitate getting on and off.

BUILDING

The seats in the second row allow four passengers (five in the Maxi version) plus a manual or electric wheelchair. The dimensions
of the seats allow you to have a useful space of 580 mm for the insertion of the wheelchair, without sacrificing the comfort of passengers.

ACCESS RAMP

The low-floor access ramp is 1,580 mm long and 780 mm wide and does not hinder rearward vision of the driver. The
composite material with which the ramp is built, the ergonomic handles, the servo assistance system and the non-slip coating
make rapid use possible and make the ramp functional and safe.

A CCESSORIES AND CUSTOMISATIONS

  • Electrical winch with remote control for wheelchair passengers;
  • Fixing support for internal spare wheel housing;
  • LED lighting system.

 

TECHNICAL SPECIFICATIONS

  • the wheelchair area is in non-slip, soundproof material: length up to 1460 mm, width 780 mm;
  • access and internal height 1,470 mm;
  • the wheelchair retaining system consists of two electric retractor reels plus two manual retractor reels.
  • a safety belt with automatic retractor reel for the passenger in a wheelchair;
  • a servo-assisted, aluminium folding ramp; length 1300 mm;
  • the fuel tank and the modified exhaust system, aligned with the lowered floor;
  • anti-puncture kit.

     

    ACCESSORIES

  • hydraulic suspension (NIVO), which allows the difference in height from the ground and the ramp to be reduced;
  • taxi ramp, allows a fast conversion of the loading area by means of a simple tipping manoeuvre;
  • two swivel seats and a folding seat, positioned in the third row;
  • Bodyguard back rests and headrests;
  • electric winch with remote control for pulling the wheelchair;
  • LED lighting system.

TECHNICAL SPECIFICATIONS

The vehicle is equipped with three seats in the second row and a two-seat folding and removable bench in the third row which allows you to configure it for the transport of a manual or electric wheelchair.

The low floor covered with non-slip and soundproofing material ensures a maximum space of 1450 mm in length, 760 mm in width for an internal input height of 1420 mm and 1460 mm with a load capacity of 300 kg. The exhibition, with integrated headrests for improved comfort of the transported wheelchairs, can be enriched with various options such as LED lighting to facilitate operations during night use, the folding ramp to optimise the loading of luggage and, the electric winch to further facilitate getting on and off.

The low-floor access ramp is 870 mm long and 780 mm wide and does not hinder rearward vision of the driver.

The ergonomic handles, the servo-assisted system and the non-slip upholstery make its use fast, functional and safe. The small size of the ramp allows the use of the original overhead compartment, ensuring safe luggage transport.

SYSTEMS OF RESTRAINT

The restraint system of the wheelchair and its passenger consists of two electrical front automatic retractor reels and two automatic mechanical rear retractor reels
with different fastening solutions, as well as a safety belt with three fastening points equipped with automatic retractor
reel. The system complies with ISO 10542 and national directives.

 

IMPACT OF BEAUTY AND AESTHETICS

The central part of the rear bumper is attached to the original tailgate thus maintaining an almost unchanged appearance. The set-up
allows to keep the ground clearance of the vehicle unchanged in running condition, thus ensuring safety and ride comfort of passenger in
the wheelchair and the other passengers.

TECHNICAL SPECIFICATIONS

Lowered floor dimensions:

  • length: 1260 mm;
  • width: 810 mm;
  • vehicle access height: 1410 mm;
  • vehicle headroom: 1480 mm;
  • split level, servo-assisted access ramp;
  • two single rear side seats placed in their original position can be folded and removed to increase cargo space;
  • four independent fixing points for the wheelchair fitted with automatic retractor reels;
  • a safety belt for retaining the passenger in a wheelchair;
  • adjustable headrest integrated into the boot door;
  • emergency boot door opening system;
  • anti-puncture kit.

 

ACCESSORIES

  • Two electric rectractor reels with automatic rewinding and two automatic manual retractor reels and safety belt;
  • electric winch with remote control for pulling the wheelchair;

Please note that this type of configuration was developed with, and approved by, the RENAULT motor company, which has issued official authorisation to produce such systems. All modifications have been granted European approval, which means that the terms of the manufacturer's original guarantee remain valid.

 

TECHNICAL SPECIFICATIONS

The size of the lowered floor coated in non-slip, soundproof rubber is: length 1220 mm and width 770mm.

The vehicle's headroom is 1450 mm.

The vehicle's access ramp is a servo-assisted, folding aluminium ramp with a non-slip covering, designed to facilitate opening/closing and provided with a double lock for blocking while the vehicle is in operation.

The seats of the middle row are placed in their original position and can be folded and removed to increase cargo space.

Four automatic retractor reels with manual actuation connected to the vehicle allow the wheelchair to be blocked quickly and safely.

The safety belt ensures the wheelchair-bound passenger's restraint, as it is linked to the vehicle by means of special hardware.

The rear door is equipped with an emergency opening system that can be operated by means a push-button or, in the case of swing doors, by two push-pull controls.

Anti-puncture cannister.

 

ACCESSORIES

  • fixing support for internal spare wheel housing;
  • The wheelchair retaining system consists of 2 front electric retractor reels with automatic rewinding system plus two rear manual retractor reels.

 

TECHNICAL SPECIFICATIONS

Lowered floor with a soundproof, non-slip rubber coating, designed so that it is possible to restore the fifth passenger seat: length 1260 mm, width 770 mm - Access height 1430 mm. - Headroom 1440 mm. - Servo-assisted access ramp - Two original seats in thier original positions - Four independent wheelchair retaining points with automatic/manual retractor reels - A wheelchair passenger safety belt, with automatic retractor reel - Wheelchair passenger headrest - Emergency rear door opening system - Aluminium fuel tank - anti-puncture kit.

 

ACCESSORIES

  • fifth seat restoration;
  • folding access ramp;
  • Two electric rectractor reels with automatic rewinding and two manual retractor reels;
  • electric winch with remote control for pulling the wheelchair;
  • fixing support for internal spare wheel housing;
  • LED lighting system.

 

TECHNICAL SPECIFICATIONS

The size of the lowered floor coated in non-slip, soundproof rubber is: length 1220 mm and width 770mm.

The vehicle's headroom is 1450 mm.

The vehicle's access ramp is a servo-assisted, folding aluminium ramp with a non-slip covering, designed to facilitate opening/closing and provided with a double lock for blocking while the vehicle is in operation.

The seats of the middle row are placed in their original position and can be folded and removed to increase cargo space.

Four automatic retractor reels with manual actuation connected to the vehicle allow the wheelchair to be blocked quickly and safely.

The safety belt ensures the wheelchair-bound passenger's restraint, as it is linked to the vehicle by means of special hardware.

The rear door is equipped with an emergency opening system that can be operated by means a push-button or, in the case of swing doors, by two push-pull controls.

Anti-puncture cannister.

 

ACCESSORIES

  • fixing support for internal spare wheel housing;
  • The wheelchair retaining system consists of 2 front electric retractor reels with automatic rewinding system plus two rear manual retractor reels.

LOW FLOOR VEHICLES

VEHICLES WITH LOWERED FLOORS

The result of important collaborations with leading European manufacturers in the special vehiclessector and with major car manufacturers, the low floor versionsare produced in Italy and approved by the manufacturers of the vehicles to which they are applied. All Handytech solutions are CE certified and comply with all quality standards.

The wheelchair housing systems are built into the vehicle, guaranteeing the steps necessary to transfer the wheelchair bound user to the correct position. The original suspension systems are not modified in any way, and access to the lowered part of the vehicle is via a servo-assisted, aluminium ramp with a non-slip covering. Customisable accessories that can be adapted to a wide range of vehicles, tastes and needs. Layouts with 4/5/6 seats, plus a wheelchair space.

Share by: